Lithium battery charger campatible with Euro 6 Engine for PV input and AC grid input
TBB Brand NEMO Series Booster Charger
NEMO converter charger could draw power from smart alternator (For DX and IDX series)
or from smart alternator as well as from solar panel (For DDX and IDDX series), to perform
a proper charging for service battery while you are driving or parking. Upon charging from
solar panel (For DDX and IDDX series), Max Power Point Tracking (MPPT) built inside
could maximize the charging from PV at any environment.
NEMO converter charger is compatible with Smart Alternator (Euro 6) which delivers
a variable output when they are not needed. It can maintain the charging with a stable
output in this situation, free from rpm or speed, to assure your battery getting a fully
charging in a shortest time. Upon connecting with PV (For DDX and IDDX series), it will
offer a maintenance charging to your starter battery to eliminate the engine starting
problem.
The Voc of this converter charger of PV input is 25Vdc(open circuit voltage).
Please double check the solar panel you are going to install matching the
maximum voltage of PV input
Features
- Right charging solution protect your auxiliary battery by regulating voltage and control current
- TBB premium II multistage charging algorithm for various battery chemicals including LPE
- Built in automatic temperature and voltage compensated battery charging
- Compatible with Euro6 Engine
- With function of battery isolation, protecting starter battery
- Dual input model with built in solar charge controller(MPPT) is available
- Supporting parallel to increase power
- Model with 12Vdc input and 24Vdc output is available
- IP65 without fan for convenient installtion
Lithium battery compatible
NEMO booster charger could deliver a proper charging for lithium battery which is normally very sensitive to voltage. In the meantime, it is designed with built-in temperature regulated charging algaorithm which is important for lithium battery under cold environment temperature.
Terminal and panel definition
With both PV and Alternator input
With Alternator input
Specifications
| Model | DX1225 | DDX1225 |
| Electrical |
| Input nominal voltage | 12VDC |
| Alternator input voltage range (smart type) | 12-16VDC |
| Alternator input voltage range (conventional type) | 13.2-16VDC |
| Automatic activation -D+ | yes |
| MPPT | N/A | yes |
| PV input voltage range | N/A | 12-25VDC |
| Output nominal voltage | 12VDC |
| Charge current | 25A |
| Efficiency | max 97% |
| Termperature compensation | yes |
| Voltage compensation | yes |
| Charge algorithm | TBB premium II multi stages |
| Protection | Battery charger over temperature/
Battery over temperature/
Over load/ Short circuit |
| Operation temperature | -20C-60C |
| Enclosure |
| Material | Aluminum with anodized, flame proof plastic |
| Battery connection | M8 |
| Protection category | IP65 |
| Weight | 0.8kgs |
| Dimension | 186.3*102.3*60mm |
| Standards |
| Safety | EN60335-1, EN60335-2-29 |
| Emission | EN55014-1,EN55014-2,EN61000-3-2,EN61000-3-3 |
Product Tags:
|
|
Campatible With Euro 6 Engine Lithium Battery Chargers For PV Input And AC Grid Input Images
|
